S1DXM-A/M多量程定时器-KERNTECH，科恩电气，工业自动化控制系统服务商

首页 > 产品中心 > Panasonic(松下电器) > FA元器件/继电器 > 定时器 > 模拟式定时器

S1DXM-A/M多量程定时器

配备多种机能的小型模拟定时器。最适合从短时间到长时间的时间控制。

编号：101577190

型号：S1DXM-A/M

品牌：Panasonic(松下电工)

货期：现货

服务：由科恩电气发货并提供售后服务

浏览：次

分享到：QQ空间新浪微博腾讯微博人人网豆瓣网开心网搜狐微博

------ 相关产品 ------

客服中心

售前咨询（天津）

售前咨询（北京）

售前咨询（济南）

项目咨询

售后与维修咨询

同品牌热门推荐

基本信息
产品种类
详细规格
产品尺寸
产品用途
可选件

UL/C-UL , CE Approved

Features

1.Multiple functions built in

The operation mode and time range can be switched by using the MODE and RANGE switches on the front panel.

2.Part number consolidation

1.The lineup consists of 64 easy-to-choosemodels.
2.An operation mode fixed type (S1DXM-A) and 4-operation mode switching type (S1DXM-M) are available.

3.Cadmium-free contacts used

To eliminate environmentally harmful chemical substances, relays with cadmium-free contacts are used.

4.Economically priced

1.Prices set to lower costs.
2.Further cost reduction when used with HJ Relay terminal socket.

5.CE marking supporte

UL and C-UL approved.

Operation Mode

1.S1DXM-A multi-range timer

Operation mode
Power ON-delay operation	When power is turned on, the output contact operates after the set time. The output contact remains on until the power is turned off.
Power ON-delay operation

2.S1DXM-M multi-range timer

Operation mode
Power ON-delay operation [MODE] switch 1: OFF, switch 2: OFF	. When power is turned on, the output contact operates after the set time. The output contact remains on until the power is turned off.

Power Flicker OFF start operation [MODE] switch 1: OFF, switch 2: ON	When the power is turned on, the output contacts repeatedly operate at the set time. The output contact begins from the off state.

Power Flicker ON start operation [MODE] switch 1: ON, switch 2: OFF	When power is turned on, the output contact operates repeatedly at the set time. The output contact outputs at the same time power turns on.

Power One-shot operation [MODE] switch 1: ON, switch 2: ON	When power is turned on, the output contact performs the on operation at the same time power turns on, only for the set time.
Power One-shot operation [MODE] switch 1: ON, switch 2: ON

Time range setting

Type		Time scale		Time unit		Min.scale	Max.scale	Setting range
S1DXM-A	10M type	×1	×10	s	m	0.05	1	0.05 to 1s	0.5 to 10s	0.05 to 1m	0.5 to 10m
	30M type			s	m	0.2	3	0.2 to 3s	2 to 30s	0.2 to 3m	2 to 30m
	60M type			s	m	0.5	6	0.5 to 6s	5 to 60s	0.5 to 6m	5 to 60m
	10H type			m	h	0.05	1	0.05 to 1m	0.5 to 10m	0.05 to 1h	0.5 to 10h
S1DXM-M	10M type	×1	×10	s	m	0.05	1	0.05 to 1s	0.5 to 10s	0.05 to 1m	0.5 to 10m
	30M type			s	m	0.2	3	0.2 to 3s	2 to 30s	0.2 to 3m	2 to 30m
	60M type			s	m	0.5	6	0.5 to 6s	5 to 60s	0.5 to 6m	5 to 60m
	10H type			m	h	0.05	1	0.05 to 1m	0.5 to 10m	0.05 to 1h	0.5 to 10h

*	The time setting range is the combination of the time scale (X1 or X10) on the dial and the time unit (s, m, or h). Example: When dial reads 1,time scale is X1 and time units is seconds, then it is 1 second.

Operation Mode and Time Range Setting

Operation mode	Power ON-delay	Power Flicker OFF start	Power Flicker ON start	Power One-shot
Operation mode switch

Time range switch
	The time setting can be switched among 4 ranges each for 4 types for an interval between 0.05 seconds and 10 hours.

1*	The product is factory shipped with all settings on the OFF side (left).
2*	Do not operate the switches with a sharp-edged object such as a knife blade.
3*	The power must be turned off when setting the time range or operation mode. Operating the switches with the power on is a cause of breakdown and malfunction.
4*	Use a force of under 5 N to operate the DIP switches when setting the time range and operation mode.

Return to top

Part Number

1.S1DXM-A Multi-range Timer
No MODE Switch, Operation Mode (Fixed): Power ON-delay

Operating voltage	Time range	Timed-out 2 Form C	Timed-out 4 Form C
Operating voltage	Time range	Part Number	Part Number
12V DC	0.05s to 10 min	S1DXM-A2C10M-DC12V	S1DXM-A4C10M-DC12V
	0.2 s to 30 min	S1DXM-A2C30M-DC12V	S1DXM-A4C30M-DC12V
	0.5 s to 60 min	S1DXM-A2C60M-DC12V	S1DXM-A4C60M-DC12V
	0.05 min to 10 hr	S1DXM-A2C10H-DC12V	S1DXM-A4C10H-DC12V
24V DC	0.05 s to 10 min	S1DXM-A2C10M-DC24V	S1DXM-A4C10M-DC24V
	0.2 s to 30 min	S1DXM-A2C30M-DC24V	S1DXM-A4C30M-DC24V
	0.5 s to 60 min	S1DXM-A2C60M-DC24V	S1DXM-A4C60M-DC24V
	0.05 min to 10 hr	S1DXM-A2C10H-DC24V	S1DXM-A4C10H-DC24V
100 to 120V AC	0.05 s to 10 min	S1DXM-A2C10M-AC120V	S1DXM-A4C10M-AC120V
	0.2 s to 30 min	S1DXM-A2C30M-AC120V	S1DXM-A4C30M-AC120V
	0.5 s to 60 min	S1DXM-A2C60M-AC120V	S1DXM-A4C60M-AC120V
	0.05 min to 10 hr	S1DXM-A2C10H-AC120V	S1DXM-A4C10H-AC120V
200 to 220V AC	0.05 s to 10 min	S1DXM-A2C10M-AC220V	S1DXM-A4C10M-AC220V
	0.2 s to 30 min	S1DXM-A2C30M-AC220V	S1DXM-A4C30M-AC220V
	0.5 s to 60 min	S1DXM-A2C60M-AC220V	S1DXM-A4C60M-AC220V
	0.05 min to 10 hr	S1DXM-A2C10H-AC220V	S1DXM-A4C10H-AC220V

2.S1DXM-M Multi-range Timer
With MODE Switch, Operation Mode (Switchable): Power ON-delay, Power Flicker ON Start, Power Flicker OFF Start, Power One-shot

Operating voltage	Time range	Timed-out 2 Form C	Timed-out 4 Form C
Operating voltage	Time range	Part Number	Part Number
12V DC	0.05 s to 10 min	S1DXM-M2C10M-DC12V	S1DXM-M4C10M-DC12V
	0.2 s to 30 min	S1DXM-M2C30M-DC12V	S1DXM-M4C30M-DC12V
	0.5 s to 60 min	S1DXM-M2C60M-DC12V	S1DXM-M4C60M-DC12V
	0.05 min to 10 hr	S1DXM-M2C10H-DC12V	S1DXM-M4C10H-DC12V
24V DC	0.05 s to 10 min	S1DXM-M2C10M-DC24V	S1DXM-M4C10M-DC24V
	0.2 s to 30 min	S1DXM-M2C30M-DC24V	S1DXM-M4C30M-DC24V
	0.5 s to 60 min	S1DXM-M2C60M-DC24V	S1DXM-M4C60M-DC24V
	0.05 min to 10 hr	S1DXM-M2C10H-DC24V	S1DXM-M4C10H-DC24V
100 to 120V AC	0.05 s to 10 min	S1DXM-M2C10M-AC120V	S1DXM-M4C10M-AC120V
	0.2 s to 30 min	S1DXM-M2C30M-AC120V	S1DXM-M4C30M-AC120V
	0.5 s to 60 min	S1DXM-M2C60M-AC120V	S1DXM-M4C60M-AC120V
	0.05 min to 10 hr	S1DXM-M2C10H-AC120V	S1DXM-M4C10H-AC120V
200 to 220V AC	0.05 s to 10 min	S1DXM-M2C10M-AC220V	S1DXM-M4C10M-AC220V
	0.2 s to 30 min	S1DXM-M2C30M-AC220V	S1DXM-M4C30M-AC220V
	0.5 s to 60 min	S1DXM-M2C60M-AC220V	S1DXM-M4C60M-AC220V
	0.05 min to 10 hr	S1DXM-M2C10H-AC220V	S1DXM-M4C10H-AC220V

Return to top

Option

S1DXM-A/M/S1DX Common Options

mm
inch

Accesories

Mounting frame
ADX18002 / ADX18002 (Titanium-gray) / ADX18006 (Gray) / ADX18007 (Black)

Appearance

Panel cutout dimensions

Board thickness 1 to 3 mm
Note)Make sure the holes area stays as right angles.

Protective cover
ADX18008

Cap block
ADX18011

Cap
ADX18004

Socket
ADX18003

Return to top

Socket Leaf Holding Clip for S1DX

ADX18012		AD68002
Figure	Dimensions	Figure	Dimensions

Socket lime holding clip for S1DXM-A/M

ADX28005
Dimensions

Type		Application
Terminal socket		ADX18012	AD68002	ADX28005
For HC relay	AP3821	-
	AP3827K	-
	AP3847K	-
For HJ relay	AHJ3821		-	-
	AHJ38211		-	-
	AHJ3848		-	-
	AHJ38481		-	-

The triangles indicate that removal will be slightly difficult when installed laterally in succession.

Return to top

Terminal Socket

HC2 slim DIN terminal socket
HC2-SFD-S

HC2 DIN high terminal socket
HC2-SFD-K

HC4 DIN high terminal socket
HC4-SFD-K

HC4 socket
HC4-SS-K

HJ2 terminal socket
HJ2-SFD/HJ2-SFD-S

HJ4 terminal socket
HJ4-SFD/HJ4-SFD-S

HC relay terminal sockets

For general rails

Applicable timers	S1DX(2c), S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	Terminal socket, HC 2-pin HC2-SF-K
Dimensions	Note) Only wire springs can be used.(Plate springs cannot be used.)
Terminal layout
Mounting hole dimensions	Panel hole dimensions for side-by-side mounting
Applicable timers	Available	Not Available

Applicable timers	S1DX(2c), S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	Terminal socket, HC 2-pin HC4-HSF-K
Dimensions	Note) Only wire springs can be used.(Plate springs cannot be used.)
Terminal layout
Mounting hole dimensions	Panel hole dimensions for side-by-side mounting
Applicable timers	Available	Available

For DIN rails

Applicable timers	S1DX(2c), S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	Slim DIN terminal socket,HC2 HC2-SFD-S
Dimensions
Terminal layout
Mounting hole dimensions
Applicable timers	Available	Not Available

HJ relay terminal sockets

Applicable timers	S1DX(2c),S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	HJ2h terminal socket HJ2-SFD
Dimensions
Terminal layout
Mounting hole dimensions
Applicable timers	Available	Not Available

Applicable timers	S1DX(2c),S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	HJ2h terminal socket(Finger protect type) HJ2-SFD-S
Dimensions
Terminal layout
Mounting hole dimensions
Applicable timers	Available	Not Available

Applicable timers	S1DX(2c),S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	HJ4 terminal socket HJ4-SFD
Dimensions
Terminal layout
Mounting hole dimensions
Applicable timers	Available	Available

Applicable timers	S1DX(2c),S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	HJ4 terminal socket(Finger protect type) HJ4-SFD-S
Dimensions
Terminal layout
Mounting hole dimensions	Drilling size of panel holes for installing the terminal sockets parallel
Applicable timers	Available	Available

Sockets

Applicable timers	S1DX(2c),S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	Socket HC 2-pin HC2-SS-K
Dimensions	The difference between the HC2 and HC4 sockets is only the number of the pins. Their appearances and sizes are the same. General tolerance: ±0.5 ±.020
Mounting hole dimensions	The thickness of applicable chassis plates ranges from 1.0 to 2.0 mm .039 to .079 inch. To install the socket easily, insert the socket top surface into the drilled holes and press the two points on the fastening plate indicated by arrows as shown in the fig. below. Dimensional tolerance of machining: ±0.1 ±.004
Applicable timers	Available	Not Available

Applicable timers	S1DX(2c),S1DXM(2c)	S1DX(4c), S1DXM(4c)
Name / Part No.	Socket, HC 4-pin HC4-SS-K
Dimensions	The difference between the HC2 and HC4 sockets is only the number of the pins. Their appearances and sizes are the same. General tolerance: ±0.5 ±.020
Mounting hole dimensions	The thickness of applicable chassis plates ranges from 1.0 to 2.0 mm .039 to .079 inch. To install the socket easily, insert the socket top surface into the drilled holes and press the two points on the fastening plate indicated by arrows as shown in the fig. below. Dimensional tolerance of machining: ±0.1 ±.004
Applicable timers	Available	Available

*Sockets for PC board
HC2-Socket for PC board: AP3825K
HC4-Socket for PC board: AP3845K

Return to top

Dimensions

Unit: mm in

1.S1DXM-A

General tolerance : ±0.5 ±0.20

Terminal layouts and Wiring diagram
Timed-out 2 Form C type

Terminal layouts and Wiring diagram
Timed-out 4 Form C type

* For the DC operating type, terminal 14 is “+” and terminal 13 is “-”.

2.S1DXM-M

General tolerance : ±0.5 ±0.20

Terminal layouts and Wiring diagram
Timed-out 2 Form C type

Terminal layouts and Wiring diagram
Timed-out 4 Form C type

* For the DC operating type, terminal 14 is “+” and terminal 13 is “-”.

Return to top

*本网站所涉及图片、产品描述、技术参数所有权归各公司所有，内容变更和技术升级恕不另行通知，以最终产品为准。

S1DXM-A/M多量程定时器